A CIP station is a method of automatic cleaning of internal surfaces of equipment and piping without disassembling them, where the highest level of hygiene is required. Therefore, CIP equipment is most often used in food industry, especially in brewing, beverage and dairy production, processed food production, and in pharmaceutical and cosmetics factories.

Cleaning agents are prepared at the station in the form of working solutions and pumped to the device or installation to be cleaned. Then they circulate in a closed circuit between the CIP station and the device in time that will ensure cleaning of the device at the set temperature. The cleaning temperature is constantly monitored and automatically adjusted. Cleaning in the so-called closed cycle saves cleaning agents, as well as reduce the amount of wastewater discharged after cleaning. At the CIP station, working solutions are prepared in concentration recommended by the manufacturer and at appropriate temperatures. The solutions are kept in tanks and drawn off by a pump as needed. The cleaning process can take place in both hot and cold water, and the temperature of the solution and system performance is always adapted to the customer's requirements.

• 3 tanks for washing solutions with insulated double jacket, capacity of about 2000 l
• 2 pumps of concentrated washing and rinsing agents
• JAD shell and tube heat exchanger for solution heating
• Circulation pump 15m³/h, 4 bar, 5.5 kW
• Automation components and necessary fittings
• CIP piping within the unit
• SIEMENS SIMATIC S-7 control cabinet
   

XC41 washing station single circuit

Capacity of pump: 40 m³/h
Pump steam pressure: 4 bar
Pump motor: 7.5 kW
R-Pump motor: 5.5 kW
Connection load: 13 kW
Steam consumption: 1500 kg/h
Dimensions (LxWxH): 6877x1093x4754
Steam consumption: 300 kg/h / 380 kg/h / 550 kg/h (for 1 line)
Material: AIS I 304 / A SI 316L optionally

XC42 washing station double circuit

Capacity of pump: 40 m³/h
Pump steam pressure: 4 bar
Pump motor: 7.5 kW + 7.5 kW
R-Pump motor: 5.5 kW + 5.5 kW
Connection load: 26 kW
Steam consumption: 3000 kg/h
Dimensions (LxWxH): 5325x1565x4138  
Steam consumption: 300 kg/h / 380 kg/h / 550 kg/h (for 1 line)
Material: AIS I 304 / A SI 316L optionally