Dosing Hasp for the Flushing Channel

  • Dosing and stopping devices for controlling the fruit flow
  • Integrated water and dirt separation
  • Optionally with stone trap

The Dosing Hasp is designed for adjusting the flow of pome fruit in the flushing channel, as well as for the separation of water, dirt and stones.

Flushing fruit with water flowing towards the dosing hasp which is installed at the end of the flushing channel. While the water passes through easily, the apples are retained at the hasp paddles and can pass only according to the rotation speed adjusted by the hand wheel. Subsequently the water together with dirt (i. e. grass, leaves) is passing through a grid and a slide made of bars and is separated from the fruits. Bigger and heavier peaces (stones, grit etc.) will be collected in the stone trap at the inlet of the dosing hasp.

  • Flushing channel with horizontal and inclined grid for water and dirt separation
  • Rotating paddle driven by a manually regulated geared motor
  • Mounting flange for the installation of a flushing channel
  • Overflow water channels on each side
  • Manual stone trap with quick lock cover


Dosing Hasp with stone trap

  • Length: 2’800mm
  • Width: (Channel) 400mm
  • Motor: 0.75kW/ 400 V / 50Hz
  • Capacity: Up to 40 t/h of apples

Dosing hasp without stone trap

  • Length: 1’350mm
  • Width: (Channel) 400mm
  • Motor: 0.75kW/ 400 V / 50Hz
  • Capacity: Up to 40 t/h of apples