High contration unit
- Creamy head and avalanche effect
- Long-lasting foam stability
- Efficient and precise nitrogen control
- Optional decarbonation
The units is equipped with a membrane contactor for nitrogenation. The internal fibers of the membrane contactor form a large contact area between gas and beverage ensuring instant and efficient dissolution. The applied N2 pressure controls final N2 concertation in beverage.
Optionally an additional membrane contactor is used to remove CO2. This is useful for beverage with higher CO2 concertation, or beverage where a specific CO2/N2 concentrations shall be achieved. The removal of CO2 is set by the level of vacuum applied to the decarbonation membrane contactor.
The unit is typically installed between two BBTs. The centrifugal pump transfers beverage from the first tank into the unit at constant pressure, temperature and flow. The outlet valve is used to set up required beverage pressure and flow. Final beverage is pushed to the second tank.
CO2 removal: up to 3 g/l, 1,5 V/V (P & T dependent)
N2 addition: up to 80 ppm (P & T and other gases presence dependent)
Pressure: Operating 1 to 6 barg, 15 to 90 psig
Temperature: Operating 0 to 5 °C, 32 to 40 °F
CIP: 50 °C, 120 °F, at 7 barg, 100 psig; Max. 65 °C, 150 °F, at 2 barg, 30 psig
Connection: Tri-clamp; other connections upon request
Dimensions: from: Height 1,9 m, 75”; Width 1,4 m, 55”; Depth 0,7 m, 28”
Weight: from 100 kg, 220 lb
Material: Stainless Steel 304, EPDM, PSU, PP